JCB 535-140 For Sale

88 results

Of 4

Show Closest First:
 
Currency:
 

88 results

Of 4

That listing has been sold or has expired. For your convenience, below is a list of similar for sale listings.

Featured Listings

JCB 535/140 telehandlers, 2013 year, from 2,800 hours, 3,500 kg, 14 metre, A/C, side shift forks, weight load indicator. Choice of 6

For Sale: CALL

L Jackson & Co Ltd
Doncaster, United Kingdom

View Details

Hi-Viz, One Owner, 64 Reg. JCB Turbo Engine, Air Con, Sway, Powershift, 3rd Service, Side-Shift Forks

For Sale: CALL

Clements Plant
Kirton Lindsey, NORTH LINCOLNSHIRE, United Kingdom

View Details

DETAILS Hours of use 1909 h Maximum lift capacity 3,500 kg Maximum lift height 1,400 cm

For Sale: CALL

Gunn JCB Ltd
Altrincham, United Kingdom

View Details

JCB 535V140 HI-VIZ - 85HP ENGINE, STAB LEGS, MANUAL 2 LEVER 1 AUX PLACING PATTERN, CAB WITH HEATER, AIR CON, FABRIC SUSPENSION SEAT, MANUAL LOCKING Q-FIT CARRIAGE, IMMOBILISER KEY PAD, PALLET FORKS, F2530 CERTIFICATE VALID UNTIL 17/1/18. LOCATION: CHAPELTOWN

For Sale: CALL

Sheffield, United Kingdom

View Details

535-140 Sway, A/C, Rear view camera, Forks, 55KW, Straight machine

For Sale: GBP £32,500

Watling JCB Ltd
Leicester, United Kingdom

View Details

For Sale: CALL

Clements Plant
Kirton Lindsey, NORTH LINCOLNSHIRE, United Kingdom

View Details

4x4x4 IMMOBILISER AIR CONDITION 4 cyl JCB TURBO DIESEL ENGINE 81 KW GEARBOX: POWERSHIFT MAX PAYLOAD: 3500 kg MAX LIFT HEIGHT: 14 m SWAY SIDE SHIFT STABILISERS FORKS GOOD TYRES LAST SERVICE: 23-9-2016 ( 3999 HOURS) WEIGHT: 11170 kg

For Sale: GBP £32,200

RS Machinery Ltd
London - St Albans, United Kingdom

View Details

For Sale: GBP £24,500

Morris Leslie Plant Ltd
Errol, United Kingdom

View Details

55 KW engine. Twin lever control. Forks.

For Sale: GBP £33,500

GREENSHIELDS JCB LTD
Farnham, Surrey, United Kingdom

View Details

63 KW engine. Twin lever control. Forks.

For Sale: GBP £31,500

GREENSHIELDS JCB LTD
Farnham, Surrey, United Kingdom

View Details

Choice of ex fleet machines, All full service records

For Sale: CALL

Hawk Plant Sales Ltd
Prees Green, ., United Kingdom

View Details

JCB 535-140 HiViz S/N 8436 Our machine from new Fourteen meter reach Jack legs 1800 hours Year 2014 Forks & bucket £35,000 Outriggers

For Sale: GBP £35,000

Ridgway Rentals
Oswestry, United Kingdom

View Details

63kW JCB Tier 3 engine. Complete with forks. Tyres 5, 10, 5, 5% remaining.

For Sale: GBP £30,500

GREENSHIELDS JCB LTD
Farnham, Surrey, United Kingdom

View Details

Very good condition, tyres, paintwork, interior in good order. Comes with forks and 3 months warranty. Big discount on previous price.

For Sale: GBP £34,807

BALLOO HIRE CENTRES LTD
Lisburn, United Kingdom

View Details

General Listings

Hi-viz low hours

For Sale: CALL

George Weir & Son
Dungannon, Northern Ireland, United Kingdom

View Details

For Sale: CALL

Liskeard, England, United Kingdom

View Details

For Sale: CALL

Liskeard, England, United Kingdom

View Details

For Sale: CALL

Liskeard, England, United Kingdom

View Details

4x4x4 IMMOBILISER AIR CONDITION 4 cyl JCB TURBO DIESEL ENGINE 81 KW GEARBOX: POWERSHIFT MAX PAYLOAD: 3500 kg MAX LIFT HEIGHT: 14 m SWAY STABILISERS FORKS GOOD TYRES WEIGHT: 11170 kg A/C

For Sale: GBP £29,500

RS Machinery Ltd
London - St Albans, United Kingdom

View Details

Hyd Forks Sway A/C Tier 4 Reversing camera Good Tyres Very clean and tidy Handler Ex housing company

For Sale: GBP £29,750

RJ and KD McLean
Dorset, United Kingdom

View Details

13-14 JCB 535-140 HI VIZ Turbo Powershift Telehandler c/w Sway, Side Shift, WLI, A/C, Forks - FD14 BBN - JCB5APXGT02339508 - choice This machine will be sold by Euro Auctions at an unreserved auction in Leeds, United Kingdom on 29th November – 1st December 2017 @ 8:00am. To view full inventory p...

Auction: 29 Nov 2017 - 01 Dec 2017

EURO AUCTIONS
United Kingdom

View Details

For Sale: CALL

Liskeard, England, United Kingdom

View Details

For Sale: GBP £28,000

Leah International
Crombie, United Kingdom

View Details

For Sale: GBP £28,000

Leah International
Crombie, United Kingdom

View Details

For Sale: GBP £30,000

Leah International
Crombie, United Kingdom

View Details

Telehandlers

It’s difficult to believe that telehandlers were only invented 35 years ago to remove the need for labourers to carry hod loads of bricks and mortar up ladders. Today these machines can place pallets of bricks weighing a tonne or more on scaffolding some 17m in the air. The bigger models with lift heights above around 9m are fitted with stabilisers and inclinometers to ensure stability.

Read More

88 results

Of 4


Telehandlers

It’s difficult to believe that telehandlers were only invented 35 years ago to remove the need for labourers to carry hod loads of bricks and mortar up ladders. Today these machines can place pallets of bricks weighing a tonne or more on scaffolding some 17m in the air. The bigger models with lift heights above around 9m are fitted with stabilisers and inclinometers to ensure stability.

Over the years additional functions have added to the telehandler’s capabilities including the advent of rotating telehandler which has a rotating upper structure similar to that of an excavator. Lift heights with the bigger rotating models now passes 20m and some can be fitted with a jib, leading some people to use them in place of a crane for lightweight lifting duties.

 

Overview

The latest trend in telehandlers is the ‘2x2’ machine which are less than 2m high and 2m wide. This allows these little machines to work inside buildings either for materials handling or demolition purposes. 

Attachments such as bucket, sweepers, concrete mixing drums, grabs, clamps and even assess platform have also enhanced the telehandler’s capabilities to a point where it is usually one of the first machines on many construction sites and one of the last to leave. 
Manufacturers in this market include JCB, Merlo, Manitou, Wacker Neuson, Bobcat, Terex (Genie), New Holland, Dieci, JLG, Caterpillar, Haulotte, Case, Skyjack, Senebogen, Sunward, Gehl, Mecalac, John Deere and Schaffer.

How to Choose a Telehandler

The emergence of telehandlers has transformed the world of materials handling. What used to be the domain of the forklift or the front-loader tractor is increasingly being occupied by these purpose-built machines. One of the main benefits the telehandler has over other machines is increased height and reach. This makes them an excellent choice where materials need to be stacked right up to roof height, and they can also provide a lot of flexibility by their ability to reach over obstacles and place or retrieve loads far to the back of a loading space. This is also useful when it comes to efficiently loading vehicles.

Placing loads far forward of the wheels, reaching high into roof spaces and extending over obstacles are all features that many operators value, as is the ability to load or unload an entire trailer from just one side. Many also use their telehandlers for access platform work in gutter clearing and the like. The four-wheel steering offered by many telehandlers is another feature that makes them hugely manoeuvrable and useful to have around in tight spaces. The hydrostatic and torque converter transmissions are also extremely efficient in switching the telehandler from forward to reverse in rapid and repetitive operations far more easily than a standard clutch. Many telehandlers can now handle loads of up to four tonnes, making them ideal for heavier jobs.

Telescopic handlers are now available in a wide variety of configurations and capacities, from the compact mini telehandler to the heavyweight artic. As far as layout goes, the design seems to have settled on a configuration with an offset cab, with this often being balanced by the installation of the engine on the opposing side of the unit. This set-up has the benefit of keeping the loading weight in check by moving the boom pivot point as far to the rear as possible. This does away with the need for a balancing counter-weight in most situations, freeing up the telehandler from unproductive baggage.

The design also means that the operator enjoys clear vision on threes sides of the telehandler, and it also provides easy access for service technicians, meaning that the telehandler spends as little time as possible in the workshop. It also means that self-service access points are easily reached by the operator. The offset cab offers easy access - something that becomes a boon when operations mean that the driver often has to get in and out of the machine. It also gives the machine a low centre of gravity and an excellent feeling of stability. It does, however, mean that the cab is constrained and a little narrower than it would be in a more standard cab on top set-up.

Thankfully, many manufacturers offer a standard central cab option and also the choice of rigid or articulated chassis. The trade-off here, however, is that the design places the boom directly in front of the operator, which obviously results in a restricted view. There is also a choice of permanent or selectable four-wheel-drive boom suspension for more comfortable transport.